SVR®
Lubricant Conditioning System
Product description
A complete recovery and maintenance solution for mineral-oil based turbine lubricants. SVR® targets and removes the dissolved varnish pre-cursors which are the cause of varnish. By removing these waste oxidation by-products, you restore the oils original solvency properties which forces any solid varnish deposits to be dissolved back into the oil where they are removed permanently.
The SVR® attacks the source of the problem on a molecular level, removing the oxidation by-products that form varnish deposits. SVR® reverses the chemical process of varnish deposit formation by restoring oil health removing varnish throughout the system and in critical components so your servo valves operate more efficiently than ever.
The ICB® patented ion-exchange resin technology removes soluble oxidation by-products and restores demulsibility during normal turbine operation without damaging additive chemistry. With the most advanced media, SVR® has 4x more capacity than competing varnish removal systems.
Acid in turbine oil is by-product of oxidation, a leading pre-cursor to varnish formation. SVR® removes acid improving oxidative stability, slowing oxidation rate and dramatically reducing a source of varnish production
Technical characteristics
Turbine oil is condemned when anti-oxidant (AO) additive levels deplete to 20% of new. A dedicated SVR® performs in parallel with AO additives to slow depletion to drastically extend the life of your oil. On top of being the ultimate varnish deposit recovery system, SVR® restores and protects oil health and actively prevents new varnish from forming. Once varnish is under control the benefit of longer oil life can be fully realized.
With SVR®, you’ll work alongside industry experts and receive comprehensive oil analysis and results interpretation to provide the best solution to extend your fluid life and make varnish vanish, for good.
In addition to a range of options including the PM-1 Particle Monitor, explosion proof models, a range of power options, even stainless steel vessels, SVR® can be completely customized to provide the perfect solution for your application.
Turbine oil varnish deposits form when oil becomes saturated with oxidation by-products from fluid breakdown. ICB® goes where other technologies can’t to remove polar oxides on a molecular level. When varnish deposits are affecting servo valve response time, that means the oil is saturated. The SVR® addresses this by removing dissolved oxidation by-products and restoring the oil’s solubility. The restored oil dissolves deposits back into solution which can then be removed by the SVR®.
The process repeats during recovery until the entire system and the oil are varnish free. That’s when you see a white patch. Once the varnish is gone, SVR® continues to work by removing by-products as they form to prevent future deposits. ICB® also slows anti-oxidant additive depletion to boost oil life. ICB® is the only technology that treats the dissolved varnish during normal turbine operation to prevent varnish from forming.
The DFE rated advanced media technologies provide the highest level of particulate capture and retention so your equipment operates unimpeded by contamination. The coreless filter element in every SVR® delivers lower ISO Codes, taking the dirt load off of critical system lube and hydraulic control filter elements (IGV, pump discharge).
In addition to particulate control, the HP107 with VTM media also removes the insoluble oxidation by-products that are suspended in the oil, working hand-in-hand with the ICB® media to rapidly reduce varnish potential and restore the health of your oil. The element is oversized to perform over a long element lifespan and to ensure low environmental and bottom line impact. To top it off, the HP107 element comes standard with an integral zero leak bypass so with every filter change, you get a new bypass.
